- Home
Homepage - Our Products
Explore the scope of safetec - Support
Service, Downloads - News
Current Topics - About safetec
Map, History - Related Links
Classification Societies - Contact
Fixed Water Based Local Application Fire Fighting System according IMO MSC/Circ. 913
The Alarm and Control System ACS-1 is a control system for fire extinguishing plants. It can be used as a control system for extinguishing systems with or witout integrated fire detection system for automatic release. The external fire detection System can be connected by optional interfaces in the display panel or remote release panel.
The very compact dimensions of the devices ease planning and mounting of the system. A system bus (CAN) reduces expense for cabling work between the devices.
Additional technical data:
Approvals: BV, DNV, GL, LR, RINA, RMRS (Russia)
Typ: CP-100
Art.No.: ACS01.100
The Fire Alarm Panel displays fire alarms and faults states as well as the status of the extinguishing system. All alarms and faults will be shown on a large LCD display with clear text indication of the appropriate extinguishing section. Bright indicator lamps indicate FIRE / EXTINGUISHING / FAULT / TEST / DISABLED / POWER. An integrated dimmer automatically adapts the brightness of the indicator lamps and the backlight of the display according to the brightness of the environment. Can be configured as main fire alarm panel or remote alarm panel. For cable connection the adapter BG06.170 is required.
Typ: CP-100
Art. No. ACS01.111
The fire alarm panel CP-100 in enclosure for wall mounting.
Typ: CP-209
Art. No. ACS01.209
The Remote Release Panel allows start and stop of max. 9 extinguishing sections from a safe location. For each section a FIRE indication and a DISCHARGE indication is available, as well as additional indications for system status and FAULT signals. The buttons for start / stop of discharge are protected by a transparent flap against unintended operation. If more than 9 sections have to be controlled, several panels can be installed in parallel. Integration into the control system by means of 4-wire-CAN-bus.
Typ: MC-308
Art. No. ACS01.308
The module cabinet can be filled up with max. 4 I/Omodules. A power supply module and a lead battery with battery charger can also be mounted.
Typ: MC-312
Art. No. ACS01.312
The module cabinet can be filled up with max. 8 I/Omodules. A power supply module and a lead battery with battery charger can also be mounted.
Typ: CP-410
Art. No. ACS01.410
The Remote Display Panel for Water Mist Systems displays the state of max. 10 extinguishing sections (red LEDs). Further LEDs (green and yellow) indicate "Power", "Pump Running", "Pump Automatic Off", "Pump Supply Failure", "Section Valve Not Ready", "Discharge Failure" and "Common System Fault". The function of each LED is described with exchangable labels. The LEDs can also be configured for display of other signals. The brightness of the LEDs can be dimmed between 0 und 100%. System integration by 4-wire-CAN-Bus. Adapter BG06.170 is required.
Typ: PST-LA828
Art. No. ACS01.828
The pump starter cabinet contains a pump starter with power supply monitor and overload indication
(optional: without overload shut down).
Typ: RP-01
Art. No. RP01.001
The Local Release Box must be mounted near to the protected space. By means of the push button the extinguishing system can be released and stopped. The push button is located in a deepening and thus protected against unintended operation. The Local Release Box offers terminals for the connection of the local fire detectors and the local visible/audible alarm device. A label with the name of the protected space can be inserted above the push button. With appropriate configuration of the I/O-module, max. two automatic fire detectors can be connected together with the manual push button to one detection line.